Description

Screw on & Squeeze!

The new way to precisely measure CARPRO concentrates for dilution is here! With this quick and easy-to-use device simply screw onto any 28mm threaded bottle. Then “squeeze and pour” for the dilution ratio required. Measurement listings are in ml and oz. The Measuring Cup will not allow any liquid to flow or leak from the bottle when pouring out the concentrate.

Features:

Easy to use
Fits any 28mm threaded bottle.
Measurements are listed in millilitres and fluid ounces.

Instructions:

Cut the straw at the markers for either 500ml or 1000ml bottles.
Insert the straw firmly into the measuring cup.
Unscrew the cap from desired concentrate bottle and screw on the Measuring Cup.
Squeeze the concentrate bottle until the liquid reaches the desired level.
Open the cap to the measuring cup and pour liquid directly into your working container.

Precautions:

The cap is not intended to fully seal the measuring cup and if the measuring cup is left full of liquid and the bottle is left lying on its side then the contents of the measuring cup can leak out. The contents of the bottle will not leak out reg
Avoid spilling or wiping solvents on the outside of the Measuring Cup. Oz and ml markings may be removed with strong solvents.